NOVITA, the Lifestyle Makers

The NOVITA DECT Cordless Phone System NP2-09 can be used with 2 different PSTN Line. It is recommended for home usage and you can now set up phones at up to 9 different locations at your home. Using the DECT technology, the NOVITA DECT Cordless Phone System NP2-09 brings mobile communications at your home up to a different level. With the sleek and wireless design of the NOVITA DECT Cordless Phone System NP2-09, the NOVITA cordless phone is both an aesthetic and quintessential addition to every household.

For any export enquires, please click here.

NP2-09 DECT Base Station Specifications
DECT GAP Compliance	Yes, compatible to most Handsets
PSTN Lines	2 Lines
Handsets	Attachable to 9 Handsets, each with a unique extension number
Active Handsets	Supports 5 active handsets for both internal and external call transfers among handsets
Phone Line Auto Searching	Yes
Coverage Area	300m outdoors, 50m indoors
Caller ID Function	Optional
Antenna	Internal
Installation Method	Wall-mounted or Desktop
Dimension	160.2 x 190.2 x 59.1 mm ( L x W x H ).

NP2-09 Handset Specifications
DECT GAP Compliance	Yes
1.88GHz~ 1.90 GHz Frequency	Handsets operate on the DECT frequency for outstanding reception and security.
Direct call mode	In direct call mode, the handset will dial a preprogrammed number after any key is pressed. Incoming calls can still be accepted as per normal.
Warning Tone	The warning tone is generated when the battery is low or the phone is out of range.
External Line Busy Tone	When the external line is already pre-occupied by another user, a "line busy tone" will be issued to the second user who tries to set up an external call.
Call Waiting Tone	When an incoming external call occurs, a "call waiting tone" will be issued to the two users who are busy on the internal line.
Error Tone	When the Handset is not subscribed or the programming function is erroneous, the "Error tone" is generated.
Last Number Redial	By pressing the key successively, the user can scroll through the last three numbers that were dialed. When the desired number is selected, the user can proceed the call by pressing the <Hook switch> button.